2014 Suzuki swift 1.2

**brf** · May 11th, 2014 02:48 AM

*direk

Saan yan under chassis specialist? Pa check ko din yun swift ko. How much inabot yun repair?

Posted via Tsikot Mobile App

**direk** · May 12th, 2014 07:30 PM

Originally Posted by brf

*direk

Saan yan under chassis specialist? Pa check ko din yun swift ko. How much inabot yun repair?

Posted via Tsikot Mobile App

sir brf, jervis underchassis specialist in aurorora blvd. between betty go Belmonte & balete drive. damage is 4.5k look for mang jun.

**brf** · May 13th, 2014 12:47 PM

Originally Posted by direk

sir brf, jervis underchassis specialist in aurorora blvd. between betty go Belmonte & balete drive. damage is 4.5k look for mang jun.

Thanks for the info!
In your case, mas ok pa yun gawa ni jervis kesa suzuki casa?
After replacing rack and pinion and stab links, same problem after 2 weeks.
Sana long term fix na yun kay jervis.

Posted via Tsikot Mobile App

**direk** · May 13th, 2014 04:45 PM

Originally Posted by brf

Thanks for the info!
In your case, mas ok pa yun gawa ni jervis kesa suzuki casa?
After replacing rack and pinion and stab links, same problem after 2 weeks.
Sana long term fix na yun kay jervis.

Posted via Tsikot Mobile App

based on my observation & feel re: handing of the car, very tight na siya compared matapos siyang gawin ng Wheels Erod. Jervis gave me a six months warranty. credit must go to sir bugoyski, a tsikot member in swift thread who went to jervis if im not mistaken early this year or late last year. same problem encountered with his 2011 Suzuki swift.

**seymorebutts** · May 14th, 2014 12:13 PM

*direk, sir, pano po ginagawa yang polyurethane injection na yan, nag se-search ako sa net ang lumalabas e puro pang fill sa crack sa wall, is it the same?

**direk** · May 15th, 2014 07:14 PM

Originally Posted by seymorebutts

*direk, sir, pano po ginagawa yang polyurethane injection na yan, nag se-search ako sa net ang lumalabas e puro pang fill sa crack sa wall, is it the same?

I don't know exactly paano ginagawa, but the principle is that they are injecting polyurethane inside the joint, let's say of a tie rod end after cleaning it thoroughly to tighten the friction. and they re grease it.

off limits kasi doon sa loob ng work area nila, but according to the supervisor that's how they do it.

**ninjababez** · June 29th, 2014 07:05 AM

just checked the new swift with 1.2l. mukhang ito na nga ang para sakin

paikutin ko nalang ng 3 or more months yun pera ko para "libre" ang down

btw wala pa ito sa showrooms sa july pa daw, checkout the current swift nalang, then imagine a lower displacement and different rims

mas maganda nga lang rims nung older swift hehehe

bukas yun ertiga naman tignan ko

**ninjababez** · June 29th, 2014 07:37 AM

**ninjababez** · June 29th, 2014 07:37 AM

**Mauihatch** · January 2nd, 2016 09:52 AM

Hi need help reg my swift 1.2 i change stock spring to max speed got it from banawe but i notice my ride become bouncy even little bump on the road what seems to be the problem thank u and happy new year