LANCER Itlog (93-96) Owners - Please Post Here!

[auto_enthusiast]

'96 EL of my relative showing oil leaks/spreads on the oil pan (front portion) and its surrounding (see photo... it might be rotated clockwise automatically when I attach it here). Very slow drip in garage floor. Oil stick level within min-max range for the 1++ years since last oil change. Is it due to the Oil Pan Gasket/Sealant? or Cylinder Head Gasket? or something else?



Edit:
^--- Posting some more photos in landscape:





Any suggestions what part to replace/repair? Thanks!

[auto_enthusiast]

Sorry.. double post (deleted and merged with post above)

[dr. d]

'96 EL of my relative showing oil leaks/spreads on the oil pan (front portion) and its surrounding (see photo... it might be rotated clockwise automatically when I attach it here). Very slow drip in garage floor. Oil stick level within min-max range for the 1++ years since last oil change. Is it due to the Oil Pan Gasket/Sealant? or Cylinder Head Gasket? or something else?



Edit:
^--- Posting some more photos in landscape:





Any suggestions what part to replace/repair? Thanks!

hard to see where the leak is coming from.
you will have to clean the area free of oil, then observe from where the oil first appears.

[Rjmar]

Mga ka lancer itlog problem ko may start ako na 1.8rpmi tapos natigel Ng 1.5rpmi kahit mainet na para bumaba need pa re start ano kaya problem sino naka experience na Ng ganito , share Naman ddyan

[dr. d]

Mga ka lancer itlog problem ko may start ako na 1.8rpmi tapos natigel Ng 1.5rpmi kahit mainet na ipapara bumaba need pa re start ano kaya problem sino naka experience na Ng ganito , share Naman ddyan

let me understand...
when you first start the cold engine, the rpm is 1800, then when the engine is hot already, it is still as high as 1500 rpm?
then when you shut down the engine and immediately re-start it, the rpm then settles at the prescribed 900-1000 rpm?
hmmm...

errr,
how does your rpm go when you turn on the aircon?

[Rjmar]

let me understand...
when you first start the cold engine, the rpm is 1800, then when the engine is hot already, it is still as high as 1500 rpm?
then when you shut down the engine and immediately re-start it, the rpm then settles at the prescribed 900-1000 rpm?
hmmm...

errr,
how does your rpm go when you turn on the aircon?

Ok na when it settled 900 but sometimes still baliktad pa din when ac off rpm up then ac on going down

[Yatta]

Mga ka lancer itlog problem ko may start ako na 1.8rpmi tapos natigel Ng 1.5rpmi kahit mainet na para bumaba need pa re start ano kaya problem sino naka experience na Ng ganito , share Naman ddyan

Try cleaning the throttle body. But more likely the servomotor is broken.

[Rjmar]

Try cleaning the throttle body. But more likely the servomotor is broken.

Tried cleaning and replace servo with throttle body build in but still the same issue

[Rjmar]

Try cleaning the throttle body. But more likely the servomotor is broken.

Gamet ko cone filter kapag ba malakas Yung higop Ng hangin servo motor na tlaga sir

[Rjmar]

let me understand...
when you first start the cold engine, the rpm is 1800, then when the engine is hot already, it is still as high as 1500 rpm?
then when you shut down the engine and immediately re-start it, the rpm then settles at the prescribed 900-1000 rpm?
hmmm...

errr,
how does your rpm go when you turn on the aircon?

Kanina result Ng nag settled sa 900 nag turn ako Naircon nag dropped Minsan umaangat sir pero kapag nag accelerate dunadrop pa din