Generator sets

**driven** · July 29th, 2007 02:15 PM

Originally Posted by boybi

driven, pinapabayaan nyo lang ba yang genset nyo overnight?

haven't tried it yet, since we purchased the generator, never pa naman nagkaroon ng long brownout eh, max na nagamit namin is 3 hours pa lang... but according to the catalog, at full tank, we might be able to run it for around 7 hours lang.

**turbo** · July 29th, 2007 03:53 PM

Yung mga gensets na ginawa ko kahit overnite pwede. Basta full tank ng diesel. Yung ginagawa ko kasi nilalagyan ko ng auxiliary fan before the radiator to simulate 40 km/hr speed, no overheat, tahimik.

Ang may tranny ay madaling paandarin at madaling patayin, kasi pwede disengage ang clutch. Pag walang clutch, yung armature ng alternator ay parang malaking bolante(flywheel) na may momentun kaya ayaw huminto agad ang genset. Pwedeng mabali ang crankshft nyo.

**falken** · July 30th, 2007 07:29 PM

Originally Posted by BlueBimmer

5KVA minimum, 6KVA recommended.

Thanks BlueBimmer.

**RedHorse** · August 4th, 2007 01:46 PM

nakita ko sa isuzuphil website nila... powertrain series engine,,

sa Monday alamin ko nga presyo

balak ko mag assemble uli. Yong dati kasi, rat-infested na

**RedHorse** · August 6th, 2007 05:42 PM

4LE2 engine.... about 200k, brandnew, naka loose parts ang instrument panel

now I must walk around binondo, how much ba 25kva dynamo at 1800rpm?

sa surplus kasi, nasa 300k na ang 30kva

**shadow** · September 7th, 2007 12:04 PM

up ko lang ito....bukas gagawin na yun MTS ko sa bahay...wala na siyang lever switch, bale 2 breaker na lang siya, picturan ko yun box ko pinasadya ko sa koten....

**shadow** · September 29th, 2007 02:48 PM

ito na yun MTS ko...

ito namna yun inside, switch off lang yun breaker sa right (Meralco) then switch on na yun sa left (gen set), meron siyang safety lever para hinde magsabay na ma switch on yun 2 breakers...

ito namna yun pinalagay kong outlet, para dyan i-plug yun genset....

**powerserve** · October 25th, 2007 01:40 AM

newbie lang ako dito sa site.. however, i have some questions regarding gen sets.. i am not a technical guy kaya mas mabuti magtanong sa mga nakakaalam.. my questions might be too basic to some, pagpasensyahan na lang po..i intend to use a diesel powered generator as back-up power for the office which would utilize 1-2 1.5hp window type ac, 4 personal computers right now but intends to add max of 10 pcs, a laser printer, a micro ref, 4 long fluorescent lamps and 3 bulbs.. i don't know how to compute the load capacities of these office equipments that is why i would like to ask what would be the ideal rating in kva of a genset that i have to buy? once i know the ideal kva, then i could probably decide what genset to buy.. thanks in advance to whatever assistance you could provide me on this matter..