Fuego Owners

**howee** · September 15th, 2009 09:03 AM

Originally Posted by MartinTuazon

Hi Howee!

Sa ngayon bz pa lahat kaya wla pa EB. Ill coordinate with blast kung kailan pwede then we will let everybody know.

what kind of fuego do you have nga pala? I have an LS 4x2 2000 model.

you can also visit our fuego site. there we can share thoughts, photos and other stuff. just hit the link below:

http://isuzufuego.ning.com/

see you..

Fuego!!!

----Martin

Thanks. I have already signed up at isuzu fuego forum. My fuego is 4x2 2001 2.8l/AT turbo .4jb1-T engine.

**4JGtootsie** · September 15th, 2009 09:46 AM

[QUOTE=Blaster87;1317995]Hey, Mart!

I'm back all right, but my Fuego is still relaxing in Quezon. I still have to find a new feed pump then go back there to install it. I'm sure it has something to do with the contamination in the fuel tank because when we took down the feed pump to clean it, it was full of debris inside. However, the pump wouldn't return to normal working order anymore. Gastos na naman after a little over a year of use. I wonder if adding a pre-filter to the system before the feed pump will do good. Anyone have any experience on this?

Hi, hope I can help. Just need to ask some questions.
What debris did you find? I suggest you also check the fuel and gas tank.
The system of fueling of most isuzu is gas tank to fuel lines to water seperator/feed fump to fuel filter to injection pump to injectors. Cleaning the gas tank (including strainer inside if equipped) water seperator and replacing the fuel filter and purging the system to flush the debris before in reaches the injector/nozzle tips would be in order.

**Benzmizer** · October 1st, 2009 11:29 AM

*MartinTuazon: Bro, I already have what you're looking for since last week. Check your inbox for messages.

**Benzmizer** · October 8th, 2009 02:24 AM

I have a set of NOS (New Old Stock) Fuego overfenders intended for someone else who flaked out. These are the OEM overfenders for the 4x4 Fuego variant.

Selling these for 7k. PM me if interested. Thanks.

Note: Set does not include the body claddings.

**Braguldo** · October 14th, 2009 07:55 AM

mga parekoy patulong naman. Nirerestore ko unti unti yung Isuzu Fuego 97 na minana ko from in laws ko. Gamit nila ito for business sa farm kaya mejo laspag talaga nung nakuha namin. Una ko nang napagawa yung sa makina, yung leak ng langis and then tune up tapos lately lang ung body repair(may butas na kasi ung bed nun eh. ok na ba yung 13 k na siningil sakin? eto yung mga ginawa
1.may kinutting sa left rear wheel drum, sa may bed din sa cab side
2.minor scratches sa gilid ni repair
3.yung pinto na may play dati nawala,
4.yung lagayan ng gulong sa ilalim naayos na din
5.tpos may undercoat siya na rubberized lang
6.prinimer niya lang kasi sa iba ako papapintura
7.yung bumper sa harap sinikipan lang yung mga parts tpos yung grill kinabitan ng plastic locks
8. yung stepper sa likod sira na ung orig kaya pina rubberized paint ko lang yung stepper minus yung bumper
work in progress pa talaga siya, eto na ang bumabagabag sakin...may kalampag siya na ang tunog ay parang square na bakal na nakasabit sa hook/bakal na nakalaylay na pumapalo sa kapwa bakal pag umaandar,galing sa may driver side minsan sa harap minsan sa ilalim mismo. akala ko kasi mawawala nung nasikipan na yung bumper eh. nakakairita talaga. tapos sobrang makalog na din yung sasakyan na yun lalo na pag pinatay yung makina nag vavibrate talaga, nung pinatignan ko sabi nung isang shop sa makina na daw talaga yung isa naman palitan na daw yung engine support. I'm planning to fix the car slowly kaya sobrang tuwa ko sa forum niyo. next project ko is replacing the busted tail lights L/R, repalcing the driver side door handle and tail gate arm. Nagtanong nako sa Walco and Jayson kaya this weekend papagawa ko na siya sa Banawe. Any suggestins for a decent and affordable car paint shop pala?

**Habagat_88** · October 18th, 2009 05:40 PM

Mga sirs magandang araw. Puede ko ba post ulit dito ung post ko sa isuzu parts thread? Hindi kasi nasagot doon. Eto po yung post ko:

Originally Posted by Habagat_88

mga sirs, hindi na gumagana yung dashboard fuel indicator ng '98 fuego 4x4 ko. does the part that makes this work need to be replaced and magkano kaya the replacement part and where to source? or puede pa ba itong ayusin? my mechanic says that ma-trabaho daw ito because the fuel tank needs to be lowered to access the fuel indicator mechanism, tama po ba? hindi ko na muna pinagalaw kasi baka hindi makakuha kaagad ng parts wala akong magamit na sasakyan.

sori if natanong na ito dati, hindi ko kasi makita kung saan. maraming salamat po...

Salamat...

**howee** · October 19th, 2009 01:30 PM

Hi Habagat,

Yes, kung sira na yung sensor/floater na nasa loob ng fuel tank, it needs to be replaced. It not difficult to do that with a seasond mechanic. I saw one ( not fuego), being done and its quite simple. You need however, to have it dismantled first and check what part is damaged before you buy the replacement part. Fuego parts are easy to find.

**Habagat_88** · October 19th, 2009 04:55 PM

Originally Posted by howee

Hi Habagat,

Yes, kung sira na yung sensor/floater na nasa loob ng fuel tank, it needs to be replaced. It not difficult to do that with a seasond mechanic. I saw one ( not fuego), being done and its quite simple. You need however, to have it dismantled first and check what part is damaged before you buy the replacement part. Fuego parts are easy to find.

Thanks for the reply Howee. May i ask if the fuel tank needs to be lowered or taken out first before the sensor/floater can be removed or can it be taken out without dropping the tank?

**howee** · October 21st, 2009 09:41 AM

The tank should be taken out first. Thats not the hard part tho. The next step is to remove some screws holding the floater mechanism inside the tank. The mechanism will be taken out from the tank for inspection or repair.

**emirage** · October 21st, 2009 02:31 PM

Originally Posted by Habagat_88

Mga sirs magandang araw. Puede ko ba post ulit dito ung post ko sa isuzu parts thread? Hindi kasi nasagot doon. Eto po yung post ko:

Salamat...

Hi Habagat,
I had mine replaced last saturday with my mechanic. Hinang nga lang pwede na kaso mas OK kapag bago kesa bumalik ka pa kapag nasira ulit. The replacement unit cost only Php800. Tama sinabi ni Howee. Ganun nga procedure na ginawa. Matagal-tagal din gawin =P