ano po ba talaga best na tint/film ceramic (with >90% Heat Rejection [TSER], Better UV Protection and no issue in reading RFID)
Thanks!!!!
ano po ba talaga best na tint/film ceramic (with >90% Heat Rejection [TSER], Better UV Protection and no issue in reading RFID)
Thanks!!!!
Consider Nano Ceramic Tint for maximum visibility even you choose the super black shade..... heat rejection for me is just secondary.
I think one of the distributors is Virgil...
He used to post in kotse.com (don't know if he posts here). But I know he's in the Progetech forums. Screen name niya Ligriv (Virgil spelled backwards).
In BF Homes, a store called Copper Blue sells Mirareed. They are in front of Tahanan Village (no experience with Copper Blue, though. I just see a Mirareed sign).
Virgil will tell you that Mirareed is tons better than 3M. While he has a definite bias because he sells it, his data seem convincing. Haven't tried it, because I get my 3M Tint for free... (don't ask why or how... I can't give anyone any...)
--Alf
Hey thanks! Sayang meron kaming lakad ng father ko that day. Sana meron pang susunod na EB para makapunta ako.Originally Posted by conrad
![]()
Roydok, DieselNubi, IMm29, ssaloon, mbt, conrad and Alfalfameister - Thanks to you all!:D
Virgil Contact: 9175292628 ewan ko lang if this is still correct... Naka Mira din car ko, ok naman and di gasgasin... Di lang masyado magaling yung naginstall sakin... but ok naman...
I don't think Virgil is still selling the Mirareeds. Anyway you can try calling/texting him if that's still his no.
sino sa inyo nakapag pakabit na ng Sunguard? ok ba ito? maganda ba yung super black or medium dark sa white car?
Hetfield,
3M is ok but be careful. daming fake nyan from China. Get it from a reputable store.
Para sakin, parang maganda ngayon tignan wala Tint, ang linis at ang presko lang tignan,hehe. Kaso yun nga lang, mabilis uminit interior kung wala tinit.
Eka nga : " Good Men Don't Use Tint"
Okay lang sana walang tint kaso mainit sa mata ng mga magnanakaw lalo na kung complete sound system mo at delikado sa carjack pag alam nilang babae nagmamaneho at walang kasama. Iyong gamit ko 3M almost six years na sa isa kong sasakyan ayos pa basta magaling lang magkabit installer mo para iwas bubbles karamihang nakikita ko.
http://tsikot.yehey.com/forums/showt...=26440&page=16
Sir, click on the link above & check out the photos of our fellow tsikoteer (Pumaren).
He installed V-kool tints.
AFAIK, the best tint (performance-wise) in the market.
you can have mirareed tints installed in autodresscode located along amang rodriguez (its near jollibee manggahan)you can have mirareed tints installed in autodresscode located along amang rodriguez (its near jollibee manggahan)
theveed, IMm29, thanks! what's the right combination? super dark on the sides then light on the windshield and medium on the rear?
I also used SunGuard before on my 626. The film isn't as thick as that of 3M, but it's darker so you're not as visible than as with 3M. Was also very satisfied with it.
IMO, super dark looks good on a white car.
u guys are very informative.... good job!!!! pahabol lg na tanong wala bang super black na malinaw sa LOOb....
Hi,
I need you advice. I will be getting a Honda Civic Alabaster Silver. Dealer says the tints that are available are the ff: 3M FX-ST, 3M FX-HP, 3M Black Chrome and Platinum Magic.
Which tint should I get? Most important for me is the heat rejection qualities while tied for 2nd is the privacy it provides while enabling good visibility especially at night. I am ok with having a darker shade tint for the sides and the rear while having a lighter shade tint for the front. From the earlier posts, I am leaning towards the shade 35 for the front and 20 for the rest. But as to which tint variant, I need some advice?
I was actually looking for 3M Magic but according to dealer, 3M is phasing this out and the new version is the Black Chrome.
Thanks