Week old Vios 1.3G
Mga sir okay lang ba 35psi ang tire pressure sa 15"? try ko kasi yung 30-32psi parang medyo numb yung stirring wheel. At ano po ba mas fuel efficient pagdating sa tire pressure, higher o lower psi? TIA
1.3J
1.3E
1.3G
1.5G
1.5 XX
1.5S
1.5SE
Week old Vios 1.3G
Mga sir okay lang ba 35psi ang tire pressure sa 15"? try ko kasi yung 30-32psi parang medyo numb yung stirring wheel. At ano po ba mas fuel efficient pagdating sa tire pressure, higher o lower psi? TIA
Higher, syempre.
Pero matagtag. Also, check your manual. The recommended pressure is stated there.
For my less than a week old 1.3E, my tires are 32psi at the front and 30 at the rear even though our manual states that the recommended tire pressure is 33/30. Pwede ka naman mag-exceed at bumaba, nasa tires mismo ang alam ko nakasulat kung ano yung max psi na kaya nya.
Pero ako, 32/30 talaga. Maybe if may byahe ng malayo tapos full load, 32/31..
------
siya nga pala, gaano katagal bago ko makuha or/cr ko? less than a month kaya?
yung plaka ok lang if abutin ng 2 months or more, kelangan ko lang talaga or/cr para mahawakan ko na rin yung memorandum ng LTO. ngayon kasi di ko pa mapanghawakan yun at wala pa ako or/cr... VDN lang
Last edited by renzo_d10; 06-12-2012 at 08:59 PM.
Nakita ko nga yung sa manual sir 32 front 30 rear for 15" wheels, pero yung sa tires na nakasulat hindi ko pa na-check.
Yung sa OR/CR ko pala sabi ni SA two weeks daw pwede na makuha pero yung plate baka abutin daw ng 2 months.Hirap pa naman taga Makati ako dami daw nanghuhuli.
![]()
Hala taga-Makati ka pa naman sir, ingat lang po. Kahit iyong VDN eh minsan hindi honored diyan. When you get your OR/CR, better have a printed copy of LTO's memorandum.
Also, strictly implemented diyan iyong conduction sticker coding. Buti sa iba hindi masyado.
Ah 2 weeks ba? Next week ko nalang pala itetext SA ko regarding my OR/CR.
@renz
Ok lang pero it's not a wax ah. More on pang touch up lang sya.
Went to SM North today and there was a Bronze 1.5G on display. Took a pic of the fogs and..
Koito brand. Thailand. Hindi na Valeo like before. Kinausap ko yung SA about the stalk and pinatawagan na lang nya ako sa Toyota Balintawak. Hehe kung pwede lang pitikin yung stalk switch na yun e.
Also noticed na glossy black finish na yung HU and aircon control panel. I hope SG can confirm this pero yung setting ng aircon vent dalawa na lang (normal and yung with vent sa floor area sa paa). Ang alam ko kasi yung pre-facelift na G maraming settings eh.
Mga sir, meron na ba dito first-hand na nahuli dahil sa "No Plate" sa Makati?
| Tsikot Car Finder Latest Toyota Car Listings Thousands of Tsikoteers see these ads everyday. Get better results with your car ads. Post your cars for sale at Tsikot Car Finder now! |
Bookmarks