Toyota Avanza Owners & Discussions [continued]

**wrock27** · March 24th, 2011 09:00 AM

Originally Posted by burjegol

Are you still using the original keyless entry of the avanza or nagpakabit ka ng alarm? Kung nagpakabit ka ng alarm, check mo baka ang link na idinagdag diyan ay maluwag ang pagka kabit. If it is still the original toyota lock, patingnan mo na rin ang link niyan or mebbe nagluluko na ang solenoid niyan

nope sir di eto galing toyota pinakabit ko lang alarm and central lock from blade after ng ondoy. san po ba matatagpuan yung mga nasabi niyo na link??

**_Qwerty_** · March 24th, 2011 11:03 AM

*wrock - actuator na yan sir.. mura lang yan.. dalhin mo kay Jimson sa banawe.. 150 lang yata isa..

sa gulong.. parati akong 35 psi.. nasanay na ako sa tagtag.. every month papahangin ako... usually nababawasan nang 2 to 3 psi every month..

**burjegol** · March 24th, 2011 03:54 PM

Originally Posted by wrock27

nope sir di eto galing toyota pinakabit ko lang alarm and central lock from blade after ng ondoy. san po ba matatagpuan yung mga nasabi niyo na link??

Kung may konting kakayahan sa pangangalikot, madali lang ito malaman.

1. remove the black triangular plastic cover a salamin (front-forward portion of the window). sundot sa ilalim and pull out.
2. remove the lock/unlock handle by unscrewing.
3. remove the screw in the door opening handle at sa armrest containing the controls for the power windows.
4. from the bottom, slowly pull out the door trim cover, till it comes free from the door.
5. Palusutin mo na lang ang door opening handle at ang arm rest in their respective openings in the door trim. trim is removed.
6. trace the locking lever mula ta-as pababa sa solenoid.
7. If you notice, merong panibagong solenoid na naka-kabit, with a stem connected to the original locking lever stem. the first one is the original solenoid, the other one is for the car alarm.
8. now lock the car and observe its action (the movement of the 2 locking lever stems)
9. unlock the car and observe kung sumusunod ang lever pata-as or it is just sliding through.

10. By the way, why not try using the original keyless entry? It is still functioning kahit meron ka nang ikinabit na panibagong car alarm system.

HOPE THIS HELPS.

**wrock27** · March 24th, 2011 04:35 PM

Originally Posted by burjegol

Kung may konting kakayahan sa pangangalikot, madali lang ito malaman.

1. remove the black triangular plastic cover a salamin (front-forward portion of the window). sundot sa ilalim and pull out.
2. remove the lock/unlock handle by unscrewing.
3. remove the screw in the door opening handle at sa armrest containing the controls for the power windows.
4. from the bottom, slowly pull out the door trim cover, till it comes free from the door.
5. Palusutin mo na lang ang door opening handle at ang arm rest in their respective openings in the door trim. trim is removed.
6. trace the locking lever mula ta-as pababa sa solenoid.
7. If you notice, merong panibagong solenoid na naka-kabit, with a stem connected to the original locking lever stem. the first one is the original solenoid, the other one is for the car alarm.
8. now lock the car and observe its action (the movement of the 2 locking lever stems)
9. unlock the car and observe kung sumusunod ang lever pata-as or it is just sliding through.

10. By the way, why not try using the original keyless entry? It is still functioning kahit meron ka nang ikinabit na panibagong car alarm system.

HOPE THIS HELPS.

sir thanks sa great info.. by the way wala po akong keyless entry before,, my avanza was the first batch that came here hehehe

**jbond** · March 25th, 2011 10:05 AM

Di pala maintenance free ang battery ng avanza. Ngayon ko lang napansin, buti na lang nag check ako

. Ngayon lang kasi ako nagkaroon ng hindi maintenance free. Ano ba dapat i-check maliban sa tubig? Thanks.

**_Qwerty_** · March 25th, 2011 10:15 AM

tubig lang i che check.. just put ordinary distilled water.. make sure wag mag over flow..

**jbond** · March 25th, 2011 10:20 AM

Originally Posted by _Qwerty_

tubig lang i che check.. just put ordinary distilled water.. make sure wag mag over flow..

Ganun ba sir. Maraming salamat.

**dreamer21** · March 25th, 2011 04:55 PM

Originally Posted by xda2jojo

maraming guru dito sir, surut lang ako....hehehe
Bardahl gamit sa bro ko for his avanza(taxi), sa akin na under warranty, caltex gamit ng casa.
yes, yan ang sabi ng mga expert
yes sir...

just wondering bakit po kaya caltex ginagamit ng casa sa inyo, dito sa amin its a toyota brand!?

**xda2jojo** · March 25th, 2011 05:08 PM

Originally Posted by dreamer21

just wondering bakit po kaya caltex ginagamit ng casa sa inyo, dito sa amin its a toyota brand!?

rebranded..

**dreamer21** · March 25th, 2011 05:09 PM

ask ko narin pala mga sir/maam napansin ko lang po thou its not a big deal to me but just the same normal lang po ba na medyo magalaw or parang nanginginig yung speedometer ko from 20kph-60kph pero at higher kph ok lang sya and steady/swabe lang pag akyat. ok naman po tapak ko sa gas pedal at di naman po nag jejerk si vanzy habang umaandar.

should i be bother one this one and have it check sa casa kasi sa ibang sasakyan namin ok lang pag akyat/swabe naman unlike my vanzy....