Mitsubishi Pajero Fieldmaster (Gen 2.5) [continued]

**blue_gambit** · October 10th, 2014 12:47 AM

Originally Posted by chris143135

Thanks ir BG. may bad effect po ba kung let's say mas mataas ang gamit ko like dex 3 or 4?

Tama si RT ...

Wala naman cguro.. pero personally i like sticking to the manual kc.. btw mobil 220 atf is dex 2 ..

**monch5** · October 10th, 2014 10:40 PM

Originally Posted by Ry_Tower

Dex 3 lang imho pinakamataas na gamitin mo. Useless na Dex 4, overkill ika nga. Been using for almost 4 years Caltex Texamatic 8888, dex 3 yun. No problem naman so far.

caltex texamatix din gamit ko.. so far ok naman. 👌

**promdiboy** · October 15th, 2014 12:15 AM

may nagpalit na ba sa inyo ng lower rear caliper pin? may corrosion na kasi yung akin kaya nag stuck daw brakes ko.

dapat daw pala wag gumamit ng lithium grease sa pin kasi aalsa yung Rubber boots. kaya had to buy this.

**chris143135** · October 15th, 2014 01:43 AM

salamat po sa ngreply

**Ry_Tower** · October 15th, 2014 09:19 AM

Originally Posted by promdiboy

may nagpalit na ba sa inyo ng lower rear caliper pin? may corrosion na kasi yung akin kaya nag stuck daw brakes ko.

dapat daw pala wag gumamit ng lithium grease sa pin kasi aalsa yung Rubber boots. kaya had to buy this.

Lithium grease pa naman din gamit ko. Pero la naman ako problem. Mga thrice ko pa lang napapabuksan yung sa brakes ko sa likod at harap.

**nelany** · October 15th, 2014 10:44 AM

Originally Posted by promdiboy

may nagpalit na ba sa inyo ng lower rear caliper pin? may corrosion na kasi yung akin kaya nag stuck daw brakes ko.

dapat daw pala wag gumamit ng lithium grease sa pin kasi aalsa yung Rubber boots. kaya had to buy this.

Ako nag palit na dati ng pin nayan. Nag stuck up at naputol nung tinatangal. Kinailangan pa na machine shop para matangal. Mahal ng pin nayan, nasa 700 ang bili ko for 1 pc.

**nelany** · October 15th, 2014 10:47 AM

PB, mag kano bili mo niyan silicon grease at saan?

**crazy_boy** · October 15th, 2014 12:32 PM

based sa kabilang thread, sa concord meron ganyang grease.

**promdiboy** · October 15th, 2014 10:45 PM

thanks nelany for the price info. muntik narin di maalis na sa caliper yung pin ko. kasi bumibilog na yung Bolt. buti di ako pinahirapan.

Silicon grease 690 less 10 percent sa concorde.

**zix888** · October 16th, 2014 08:59 AM

Originally Posted by promdiboy

may nagpalit na ba sa inyo ng lower rear caliper pin? may corrosion na kasi yung akin kaya nag stuck daw brakes ko.

dapat daw pala wag gumamit ng lithium grease sa pin kasi aalsa yung Rubber boots. kaya had to buy this.

nakapagpalit na din ako niyan, the hard way

yung naka box in white(using your photo), nabali and naiwan sa loob ng caliper, due to corrosion. had to drill the back side, and weld it after i was able to remove the small portion na naiwan sa loob.