Kia Pregio

[foreverbutch]

mga sirs ano kaya problema ng pregio ko? kasi ayaw nya mag start pag mainit ang makina. pag yung bagong patay pa lang.

Sir palitan mo ang ignition contact sa susihan. Madali lang kalasin at ikabit yan, 300 php lang naman ang presyo tapos okay na yan. Lose contact na kasi ang copper nyan lalo na kapag umiinit. Ganyan din kasi ang nangyari sa akin. Before niremedyohan ko muna kasi walang pangbili at akala ko mahal. Til I finally decided to replace the ignition contact. Now, okay na sya.

[foreverbutch]

okay naman ang redondo ng makina kapag istart mo?

kung mabilis, may problem ka sa fuel system, possible ng may hangin ang fuel line mo o sa fuel pump.... wait na din natin reply ni sir butch kasi may workshop manual siya baka may iba pang reason dun.

kung cold engine quick start ba?

Very funny nga mga Sir, kasi before hindi ko pa alam kung bakit ayaw mag start kapag mainit ang engine. Sobrang mahal ko ang aking pregio kaya pina paypayan ko pa ng abaniko ang engine upang mag start lang agad.
Maron pa nga sa akin nag aabot ng posporo, sindihan ko na lang daw ang pregio.

[Esnie.com]

Very funny nga mga Sir, kasi before hindi ko pa alam kung bakit ayaw mag start kapag mainit ang engine. Sobrang mahal ko ang aking pregio kaya pina paypayan ko pa ng abaniko ang engine upang mag start lang agad.
Maron pa nga sa akin nag aabot ng posporo, sindihan ko na lang daw ang pregio.

anu daw culprit bakit nagkakaganon? hindi ko pa na-experience sa pregio ko yan since na nabili ang unit.

[Esnie.com]

Mga Sir, baka binebenta nyo fog light ng pregio nyo, bilin ko na lang... hehehe

[aga_cruz]

good day sir butch musta naman ang sliding ng pregio pag back ward ? may times na ba na nabitin ka at kailangan talagang itulak? yun kasi ang iniiwasan ko wala pa pepe pang repair ng matic trans

[foreverbutch]

good day sir butch musta naman ang sliding ng pregio pag back ward ? may times na ba na nabitin ka at kailangan talagang itulak? yun kasi ang iniiwasan ko wala pa pepe pang repair ng matic trans

Hindi ko pinaaabot sa ganyan Sir kaya so far dipa naman ako nabitin. Pero sabi nang iba, masarap daw ang bitin.
Ako Sir, papalitan ko na lang ito ng buo na transmission, kapag nakaipon na. Ganun din kasi Sir ang rapair lang, magloloko din muli.

[aga_cruz]

what do you think sir butch kung converted nalang natin sa manual?

[mintoy]

mga bro, just wanted to share what happend today. the water pump of our pregio finally gave up on me. i discovered that it needed replacing when i was in mulanay, quezon last holy week. luckily, dito na sa manila bumigay. got a new replacement one from goodgear (made in korea) for 1,000. labor of the mechanic in front of goodgear was charging 1,000. but cuz there was no space in goodgear to park the van. bought the new water pump and installed it at home. paid my suke mechanic 300 for his time

[mintoy]

mga bro, just wanted to share what happend today. the water pump of our pregio finally gave up on me. i discovered that it needed replacing when i was in mulanay, quezon last holy week. luckily, dito na sa manila bumigay. got a new replacement one from goodgear (made in korea) for 1,000. labor of the mechanic in front of goodgear was charging 1,000. but cuz there was no space in goodgear to park the van. bought the new water pump and installed it at home. paid my suke mechanic 300 for his time

[Esnie.com]

mga bro, just wanted to share what happend today. the water pump of our pregio finally gave up on me. i discovered that it needed replacing when i was in mulanay, quezon last holy week. luckily, dito na sa manila bumigay. got a new replacement one from goodgear (made in korea) for 1,000. labor of the mechanic in front of goodgear was charging 1,000. but cuz there was no space in goodgear to park the van. bought the new water pump and installed it at home. paid my suke mechanic 300 for his time

grabe naman sumingil ng labor ang mekaniko sa goodgear, 1k petot na gad yun... anyway mabuti at walang space atleast nakasave ka ng 700. Btw panu bumigay yung water pump? bearing ba?

[aga_cruz]

sir paano malalaman pag sira na ang water pump? galing ako antipolo kahapon sa buso busoba yun grabe pala paakyat dun nabitin ang reverse ko dahil naka pasok ako sa maling daan no choice ako kung di biglain ang reverse accelerate muna saka pasok sa reverse then bomba bomba hirap talaga pag sliding na ang matic trans

[Esnie.com]

sir paano malalaman pag sira na ang water pump? galing ako antipolo kahapon sa buso busoba yun grabe pala paakyat dun nabitin ang reverse ko dahil naka pasok ako sa maling daan no choice ako kung di biglain ang reverse accelerate muna saka pasok sa reverse then bomba bomba hirap talaga pag sliding na ang matic trans

usually sir aga na nasisira sa water pump ay yung bearing, nagstuck up nagkakaroon ng abnormal sound then madalang naman mangyari sa water pump na masiraan ng impeller blades

[mintoy]

the bearings of the water pump was loose. i only noticed this cuz of unusual noise on idling while i was checking the engine bay during holy week. fortunately, it was not leaking water. i prayed that i wont give up on me for thejouney home (300km trip one way).

i find the labor in goodgear a bit high. but its very convenient cuz if you find other stuff that have to be replaced. you can buy the parts and replace immediately. cuz the engine bay is partially hidden. you only get to view the whole engine when the driver seat and floor are removed.

my mechanic charge me 300 only because he used my tools and sealant. and i did half the work...hehehe

i've used the van yesterday, and thing seems to be fine now:-)

[Esnie.com]

[QUOTE=mintoy;1228647]the bearings of the water pump was loose. i only noticed this cuz of unusual noise on idling while i was checking the engine bay during holy week. fortunately, it was not leaking water. i prayed that i wont give up on me for thejouney home (300km trip one way).

i find the labor in goodgear a bit high. but its very convenient cuz if you find other stuff that have to be replaced. you can buy the parts and replace immediately. cuz the engine bay is partially hidden. you only get to view the whole engine when the driver seat and floor are removed.

my mechanic charge me 300 only because he used my tools and sealant. and i did half the work...hehehe

i've used the van yesterday, and thing seems to be fine now:-)[/QUOT

btw sir mintoy yung water pump na nabili mo may nakalagay pang heater pipe pang nakalagay?

[aga_cruz]

mga sir and kia pregio owner naka tangal na ba termostat ng radiator nyo? yung akin kasi balak ko na ipagtangal ano po ba maisusugest nyo?

[mintoy]

[quote=Esnie.com;1229081]

the bearings of the water pump was loose. i only noticed this cuz of unusual noise on idling while i was checking the engine bay during holy week. fortunately, it was not leaking water. i prayed that i wont give up on me for thejouney home (300km trip one way).

i find the labor in goodgear a bit high. but its very convenient cuz if you find other stuff that have to be replaced. you can buy the parts and replace immediately. cuz the engine bay is partially hidden. you only get to view the whole engine when the driver seat and floor are removed.

my mechanic charge me 300 only because he used my tools and sealant. and i did half the work...hehehe

i've used the van yesterday, and thing seems to be fine now:-)[/QUOT

btw sir mintoy yung water pump na nabili mo may nakalagay pang heater pipe pang nakalagay?

bro. the heater pipe is separate from the water pump.

[mintoy]

mga sir and kia pregio owner naka tangal na ba termostat ng radiator nyo? yung akin kasi balak ko na ipagtangal ano po ba maisusugest nyo?

bro, why are you planning to remove your thermostate.

there was a time when we removed the defective thermostate in our pregio. idling temp was below 1/4. driving around temp would go up slightly above 1/4. when we installed a new thermostate. it would stay stuck at 1/2. if it would go beyond this overheat na.

i would suggest not removing the thermo unless its defective. as in theory it maintains the optimal running temp. if your temp goes above 1/2. then there is something wrong. if you suspect the cause of your overheating is the thermo. then just replace it with a new one. new original thermo is around 300 in goodgear. just make sure that the rating is for tropical 70-80 degrees.

[Esnie.com]

bro, why are you planning to remove your thermostate.

there was a time when we removed the defective thermostate in our pregio. idling temp was below 1/4. driving around temp would go up slightly above 1/4. when we installed a new thermostate. it would stay stuck at 1/2. if it would go beyond this overheat na.

i would suggest not removing the thermo unless its defective. as in theory it maintains the optimal running temp. if your temp goes above 1/2. then there is something wrong. if you suspect the cause of your overheating is the thermo. then just replace it with a new one. new original thermo is around 300 in goodgear. just make sure that the rating is for tropical 70-80 degrees.

thermo of my pregio was removed permanently, i think 7 yrs na walang thermo never ako naka-experience ng overheating and it never reached 1/2 even in uphill or traffic situation. sa design ng cooling system ng pregio madalas talaga masira ang thermo and to avoid or prevent na mag overheat kapag nagmalfunction i decided to removed it na lang.

[aga_cruz]

same here pa check ko kahapon yung pregio ko wala na din palang thermo? dun ba sa hose nakalagay yun i mean sa dugtungan nung hose? btw tniext ko si espi di din sya ok pag walng thermo na nakalagay sa radiator?

[aga_cruz]

pansin ko lang pag wlang thermo sa rad ang pregio pag hindi naka aircon ayaw tumaas ng temp gauge halos isang guhit lang kung tumaas kahit na naka 5km na ako cold pa din hehehe pero once na nag aircon ako dun na sya tumataas