Isuzu Crosswind Owners Thread [continued]

[mjuane]

sir how much did the tire cover cost you and where did you get one?

[Benzmizer]

sir how much did the tire cover cost you and where did you get one?

I could not remember anymore but it should be almost quite the same cost as the current tire cover. I had converted the look of my '03 that time to a '05. It'll be a challenge to find that tire cover design nowadays.

I would suggest that you convert to the 2010 tire cover design.

[mjuane]

a question for crosswind owners '04 model and below

naging problem nyo ba na paglabas palang sa casa eh after a few weeeks nagka scratches yung tint nyo which i think the power window is causing.

ngayon ko lang kasi inasikaso since hinand down na sakin ng dad ko ung car

[jayghost213]

Help nmn mga peeps, my xwinXT03 needs to change its engine oil(mobil delvac MX 15w45) but i was thinking if i could bring the besco 10w30 engine oil back... my odo is 100k km. i guess my question is, Would there be a problem if i switch it back to 10w30 the fact that the engine not new anymore? Thanks much in advance

[Benzmizer]

Help nmn mga peeps, my xwinXT03 needs to change its engine oil(mobil delvac MX 15w45) but i was thinking if i could bring the besco 10w30 engine oil back... my odo is 100k km. i guess my question is, Would there be a problem if i switch it back to 10w30 the fact that the engine not new anymore? Thanks much in advance

Follow the recommended viscosity for your engine to be sure.

[jayghost213]

Follow the recommended viscosity for your engine to be sure.

Thanks Sir Benz.. Accdg to my manual. it should be 10w30(BESCO) - but i was reading some threads here, and some are using petron and caltex 15w45 for their 4ja1 engine w/c is the same as the mobil delvac mx15w45 viscosity.... Because i've been using the 15w45 on my xwind for almost 3years now and i'm not that sure if there'll be a longterm/shortterm problem if i'll switch back to 10w30. what do you think?

[Benzmizer]

Thanks Sir Benz.. Accdg to my manual. it should be 10w30(BESCO) - but i was reading some threads here, and some are using petron and caltex 15w45 for their 4ja1 engine w/c is the same as the mobil delvac mx15w45 viscosity.... Because i've been using the 15w45 on my xwind for almost 3years now and i'm not that sure if there'll be a longterm/shortterm problem if i'll switch back to 10w30. what do you think?

The minimum recommended should be good: SAE 40 CD Grade

[hinDMaxsiado]

2001 Crosswind XT owner

Still runs like champ the way it has always been....

[red16]

Ano kya pwedeng ilagay sa "rubber" black (sa mga pinto at corners ng xwind) na paint or any product na pwede bumalik yung kintab at kulay nya? Aside sa pag palit ng bago.

[japogi15]

Hi Guys, tanong ko lang yung proper coolant application, kailangan ba i-drain muna yung tubig sa radiator tapos lagyan ng coolant then bagong tubig? Please advise. thanks in advance.