2011 Hyundai Accent Modification/ Accessories made

[WeaponX]

sorry sir, medyo urgent lang kasi, baka po me alam kayo?.

Try mo sa Casa. Try mo rin sa shops sa Banawe like Maspro. Last time na bumili ako sa Honda casa, 2K ang pair. Baka di naman nagkakalayo ng price sa Hyundai casa.

[xtianaccent12]

@WeaponX thanks sir.. and twoyotas

[maxhedrum]

I had my side mirror replaced last feb 2012 via insurance. If you buy from casa, its a whole assembly costing around 8-9k + labor.

mga sir may ma rerefer po ba kau na shop para sa kin, nanakaw po kasi ung right side mirror ko, mga mag kano po kau yun? salamat po ang more power

[xtianaccent12]

@maxhedrum, salamat po napalitan ko na po yung side mirror ko, sa banawe po ako nakakita....

[xtianaccent12]

next project po eh, car alarm any referal po.... where and how much ? salamat po ulit sa mga tumulong sakin..

[WeaponX]

next project po eh, car alarm any referal po.... where and how much ? salamat po ulit sa mga tumulong sakin..

Sa Banawe pa rin. Sayang, nandon ka na di ka pa nagtanong. Price ranges from 1.8k to 4k. Try mo check sa sulit, meron din doon at 2k si matt nagbebenta. Place nya sa Pasig.

[i10]

@maxhedrum, salamat po napalitan ko na po yung side mirror ko, sa banawe po ako nakakita....

san po banda sa banawe kayo nakakuwa? magkano? may nabili kase ako, ampanget naman ng quality

[dinJ]

nice... sa fontana ba to sir?

Yes sir sa Fontana yan.

[G-Man]

@renzo,

About PMS, iba iba experienced ng mga naka accent. I guess, bottom line is, every CASA has its own gimicks when it comes to making money...

However sa case ko, I always bring my own supplies (eg. Oil Filters, Oil, glow plugs, Air Filters, etc.). And my CASA never charged me with corkage fees. Howerver, some CASAs do charged as raised by some of the Accent owners...

By the way, my mod for the week:

Leather Wrapped Center Fascia



DIY Projects Involved:

Extended the sides of the 2 DIN Panel. May gap kasi of about 8mm per side. And I was never been comfortable filling the gap with black foam.

What I did, is use plexi glass, then use resin to bond the plexi glass to the center fascia. Then plastic fillers to smooth out the surface. I opt to have it wrapped, kasi on my experience, sooner or later, yong paint ng plastic vinyls would be chipping off in due time.. kaya, I choose to have it wrapped to leather rather than painting it.

However, things weren't smooth sailing during installation because of the double stiches. Ang hirap ipasok without those sides getting wrinkled. That's the best I can do for now... I might try shaving off 1mm of those sides to compensate the leather's thickness. I still have another trim at my disposal to try the above mentioned corrective measure...

Authentic leather po ginamit, left over from a previous bimmer series 3 reupholstery. Upholstery was performed by my suking shop dito sa cebu...

Sir Meikey,

Paano mo na flush mount yung 2-din head unit. We have the same head unit pero sa akin naka labas ng 20mm.
Nag pa fabricate ka ba ng bagong bracket?

Thanks.

[christian24]

new hr.. is there someone hr from cebu? cn i ask wer cn i buy H27(880) bulb?thx