Assemble aircon system from scratch

[dbok02]

Sirs, baka may nakagawa na or may idea with regard this inquiry. Assuming wala pong existing aircon ang vehicle, is it practical to assemble this from scratch? Yun tipong bibilhin separately ang mga major parts then pa assemble/install sa aircon shop or technician? Kung may nakagawa na po or may idea, kindly share po what parts to buy OR is it better/wiser to buy surplus aircon assemblies na lang?

Thanks in advance for any inputs.

[jick.cejoco]

Sirs, baka may nakagawa na or may idea with regard this inquiry. Assuming wala pong existing aircon ang vehicle, is it practical to assemble this from scratch? Yun tipong bibilhin separately ang mga major parts then pa assemble/install sa aircon shop or technician? Kung may nakagawa na po or may idea, kindly share po what parts to buy OR is it better/wiser to buy surplus aircon assemblies na lang?

Thanks in advance for any inputs.

it is smarter to purchase original equipment for your car. they have already been designed, fitted and proven to work than experimenting and modifying. it will be easiest if you buy the whole system from a dead donor car.

[gorionikoy]

make/model?

[mitzusu4DJ1]

bili ka ng compressor, condenser, evaporator assembly, hoses fittings, drier yan mga major parts ganyan binili ko nilagay ko sa FX talyer made materials cost 15K. sa shop pa estimate mo yan mga doble mga 30K single evaporator lang yon...

[Retz]

Better buy the whole system mahirap ang chop2x.

[armscor40]

if ever i opt to get an owner type jeep and decide to fit it w/ an aircon system, just like what the TS is asking...what is the best option?

if the whole system, what can you recommend? in low budget mode but quality parts?

[sotel]

mga sir kung sa xlt auv lalagyan ng ac magkano kaya magagasto?

[mitzusu4DJ1]

mga sir kung sa xlt auv lalagyan ng ac magkano kaya magagasto?

bro, mga 30K yan pataas, break-down natin ang parts price para my idea ka kung saan ka makakatipid,

Compressor na babagay sa Engine mo,
Compressor Sanden Orig 8,000 pag china 4,000 pag Denso 10,000 another option Surplus compressor mga 2K


Compressor 8,000
2 Condenser 1,500
Drier Jumbo 450
Evaporator Assembly Front 2,000
Evaporator Assembly Long 6,000
2 Aux Fan 2,000
Hose, Tubing, Electrical,
bracket, bolt & nut, fittings 3,000

Total 23,000

additional ang labor ng gagawa...

[glenn manikis]

kahit surplus lang ang compressor mo basta maganda pa bomba ok yun... pag dating sa compressor ang bilhin mo eh 17C kahit 3 evaporator at 2 condenser kayang kaya... surplus nyan nasa 3k lang.... ang bilhin mo nalang na bago eh ang evaporator... ang suggestion ko ang bilhin mo eh yokohama nasa 4.-4.5k ang bnew.... then ang pinaka importante eh yung GAGAWA dapat magaling at hindi kanto kanto lang na gumagawa.... they should offer money back and at least 3 months warranty... then pag back job dapat wala kang addl. pang babayaran.... like freon etc.... karamihan na auto a.c. shop may warranty pero singilin ka pa din sa freon.... B.S. yun at sila ang nagkamali....

[Ry_Tower]

kahit surplus lang ang compressor mo basta maganda pa bomba ok yun... pag dating sa compressor ang bilhin mo eh 17C kahit 3 evaporator at 2 condenser kayang kaya... surplus nyan nasa 3k lang.... ang bilhin mo nalang na bago eh ang evaporator... ang suggestion ko ang bilhin mo eh yokohama nasa 4.-4.5k ang bnew.... then ang pinaka importante eh yung GAGAWA dapat magaling at hindi kanto kanto lang na gumagawa.... they should offer money back and at least 3 months warranty... then pag back job dapat wala kang addl. pang babayaran.... like freon etc.... karamihan na auto a.c. shop may warranty pero singilin ka pa din sa freon.... B.S. yun at sila ang nagkamali....

I agree with this. Pero kung jeep lalagyan, dapat yung windows mo at doors maganda ang fit and finish. Lapat lahat ng rubber para hindi masasyang yung cold air. Saynag lang kung may tagas din sa jeep.